VSM 7.x has support for ONVIF 2.0 compliant device using the onvif driver. Please check with the respective camera vendor for the ONVIF support and the latest compliant driver available from them. Note - Cameras have some variations in how they have implemented the ONVIF. Overview Onvif Device Manager is a software made by the Onvif community, used to discover all cameras in the local network that supports the Onvif standards. Because the Verifire supports Onvif standards, so we can use this software to discover the camera. The default network setting of the Verifire camera is DHCP, short for Dynamic. ONVIF Device Manager is an open-source software application (currently available for Windows only), which scans your network for cameras, DVR's, and NVR's, trying to locatea stream address that can then be used for connecting your device to Angelcam. Who should use this? If you’ve already setup port-forwarding for your device, but Angelcam can't find a stream automatically and/or.
SecuritySpy is our flagship video surveillance software product for Mac OS X, and as of version 3.2, SecuritySpy supports the ONVIF protocol. Here are the answers to some common questions, and information about this new feature.
What is ONVIF?
ONVIF is an open industry standard for IP-based video surveillance products. In the past, SecuritySpy would have to be pre-programmed with profiles for each camera it supports, containing information about the supported streaming formats, audio capabilities, communication ports, resolutions, frame rates, Pan/Tilt/Zoom features etc. This is inconvenient and time-consuming for us as developers, and also bad for customers because there is an inevitable delay between a new camera coming on the market and an update to SecuritySpy to officially support it.
With ONVIF, all this information can be obtained from the camera automatically. Therefore, any new ONVIF-compliant camera hitting the market can be immediately used with SecuritySpy using the ONVIF setting built into the software.
How do I use the ONVIF setting?
Open the Video Device Settings window in SecuritySpy and add a new network device. Select ONVIF as the device type:
Enter the camera’s IP address and username/password and click OK – that’s it!
As usual, the camera should be set up with a static IP address on your local network.
Onvif Manager Windows
How do I choose stream settings?
The camera will come pre-programmed with certain “profiles” to choose from, which may differ in terms of compression format, resolution, frame rate, or quality. To choose the desired profile, click the “Get profile list” button in the Video Device Settings window and SecuritySpy will display a list of all the profiles reported by the camera:
The exact parameters of each profile may be configurable via the camera’s settings pages, accessible using a web browser.
Is Pan/Tilt/Zoom supported?
Yes. SecuritySpy will automatically detect this and will be able to control the PTZ of any capable camera. Different cameras move at different speeds though, so if you find that the movements are too fast or too slow, you can adjust the speed via the PTZ windows in SecuritySpy (click the triangular disclosure icon at the bottom of the window to see this setting):
Can SecuritySpy connect to an ONVIF camera over the internet?
Yes, however auto-discovery of the camera’s ports will not work in this case. You will need to specify the ONVIF port and RTSP port if they are non-standard (the standard ports are 80 and 554 respectively).
Will all ONVIF cameras work with SecuritySpy?
Almost all ONVIF-compliant cameras will work, however we have previously come across two possible problems. Firstly, the web interfaces of some cameras don’t work in Mac browsers, so such cameras cannot be configured on a Mac. Fortunately, these days manufacturers tend not to be so shortsighted, and recognise that a significant proportion of their potential market comprises Mac users. Using a PC or some Windows emulation software (such as Parallels) for the initial camera setup can get around this. Secondly, in rare cases, the video stream produced by some cameras cannot be decoded by QuickTime (which is what SecuritySpy uses for its video decompression). To minimise the chances of this, stick to respected manufacturers, or manufacturers already shown on our list of compatible cameras. If in doubt, it’s a good idea to check the returns policy of the store from which you are planning to purchase your camera to make sure you are able to return it if you have to.
ONVIF Device Manager is an open-source software application (currently available for Windows only), which scans your network for cameras, DVR's, and NVR's, trying to locatea stream address that can then be used for connecting your device to Angelcam.
Who should use this?
If you’ve already setup port-forwarding for your device, but Angelcam can't find a stream automatically and/or:
- Your device documentation doesn't mention a RTSP or MJPEG stream path
- Your camera supplier or manufacturer provides no support
- You can't find any documentation or information on Google
Finding a stream path
- Step 1: Be sure that you are on the same network as the device you're trying to discover (advanced users can also try to find a stream address for remotely accessible cameras as well, just use the 'Add' button and specify the public address and forwarded ONVIF port of the remote device)
- Step 2: Download and install ONVIF Device Manager (Windows only)
- Step 3: Click the 'Refresh' button to scan your network
- Step 4: Select 'Live Video' from the menu
- Step 5: Copy the stream address, shown under the live video, to your clipboard (be sure to replace your local IP address with the public one when connecting directly)
- Note: if your camera is password protected, be sure to enter your credentials in the upper left corner.
Connecting a camera to Angelcam
a) With AngelBox
- Step 1: Open AngelBox's Camera Connector, type in your AngelBox's ID, and let AngelBox detect your device
- Step 2: Once found, click, 'I want to use a different camera stream channel'
- Step 3: Paste the stream address from your clipboard and delete everything except the part after the port. For example if your camera stream has been discovered at 'rtsp://admin:[email protected]:554/cam/realmonitor?channel=1&subtype=1' use '/cam/realmonitor?channel=1&subtype=1' only.
A more detailed procedure is explained here.
b) Without AngelBox
- Step 1: Port forwarding needs to be configured on your router for the designated camera
- Step 2: Open Camera Connector
- Step 3: Paste the stream address
- Step 4: Replace the local IP address with the public IP address of your network
- Step 5: Replace the stream port of the camera with the port you set up during the configuration of port forwarding in Step 1
A more detailed procedure is explained here.
And that's it! ?
Onvif Device Manager For Mac Os
If you have any further questions please don’t hesitate to contact us at [email protected].
Onvif Device Manager For Mac
Still need further assistance? Why not check out our Angelcam Community, where you can connect with other users who are sharing their own experiences and insight into various Angelcam topics and problems.